Joining the QUBUS semi-underground waste solution, Sotkon also presents a compact solution called Qubus E. The Qubus E system consists of the partially underground installation of high-capacity containers (3m3 or 5m3) for waste disposal, where the container and the top cover are joined together and rise at the same time. Among the many advantages of this waste system, we highlight its low maintenance cost and the simplicity of its collection, courtesy of having no complex mechanisms built in.
Bilateral Loading
Top Loading
Sotkon's concrete bunker is unitary and independent. This allows for greater adaptation to the installation surroundings and to the customer's needs - it can be placed individually or in groups. In addition, it is completely watertight and can be installed in areas with high phreatic levels.
Sotkon's concrete bunker is unitary and independent. This allows for greater adaptation to the installation surroundings and to the customer's needs - it can be placed individually or in groups. In addition, it is completely watertight and can be installed in areas with high phreatic levels.
Sotkon's concrete bunker is unitary and independent. This allows for greater adaptation to the installation surroundings and to the customer's needs - it can be placed individually or in groups. In addition, it is completely watertight and can be installed in areas with high phreatic levels.
3m³ Bunker
3m³ Bunker
Sotkon's concrete bunker is unitary and independent. This allows for greater adaptation to the installation surroundings and to the customer's needs - it can be placed individually or in groups. In addition, it is completely watertight and can be installed in areas with high phreatic levels.
Sotkon's concrete bunker is unitary and independent. This allows for greater adaptation to the installation surroundings and to the customer's needs - it can be placed individually or in groups. In addition, it is completely watertight and can be installed in areas with high phreatic levels.
5m³ Bunker
5m³ Bunker
Sotkon's concrete bunker is unitary and independent. This allows for greater adaptation to the installation surroundings and to the customer's needs - it can be placed individually or in groups. In addition, it is completely watertight and can be installed in areas with high phreatic levels.
Sotkon's waste containers are made of polyethylene, with high mechanical strength. The body of the container has no metal parts in contact with the waste and the components used for handling are made of hot-dip galvanized steel. The containers for the Qubus E semi-underground system are available with capacities of 3m3 and 5m3, ready for rear loading (closed-bottom) or top loading (open-bottom).
Sotkon's waste containers are made of polyethylene, with high mechanical strength. The body of the container has no metal parts in contact with the waste and the components used for handling are made of hot-dip galvanized steel. The containers for the Qubus E semi-underground system are available with capacities of 3m3 and 5m3, ready for rear loading (closed-bottom) or top loading (open-bottom).
3m³ Container
Sotkon's waste containers are made of polyethylene, with high mechanical strength. The body of the container has no metal parts in contact with the waste and the components used for handling are made of hot-dip galvanized steel. The containers for the Qubus E semi-underground system are available with capacities of 3m3 and 5m3, ready for rear loading (closed-bottom) or top loading (open-bottom).
3m³ Container
3m³ Container
Sotkon's waste containers are made of polyethylene, with high mechanical strength. The body of the container has no metal parts in contact with the waste and the components used for handling are made of hot-dip galvanized steel. The containers for the Qubus E semi-underground system are available with capacities of 3m3 and 5m3, ready for rear loading (closed-bottom) or top loading (open-bottom).
5m³ Container
Sotkon's waste containers are made of polyethylene, with high mechanical strength. The body of the container has no metal parts in contact with the waste and the components used for handling are made of hot-dip galvanized steel. The containers for the Qubus E semi-underground system are available with capacities of 3m3 and 5m3, ready for rear loading (closed-bottom) or top loading (open-bottom).
5m³ Container
5m³ Container
Sotkon's waste containers are made of polyethylene, with high mechanical strength. The body of the container has no metal parts in contact with the waste and the components used for handling are made of hot-dip galvanized steel. The containers for the Qubus E semi-underground system are available with capacities of 3m3 and 5m3, ready for rear loading (closed-bottom) or top loading (open-bottom).
The Qubus E system is designed to be easily adaptable to all existing top collection vehicles and available hooking systems, including fully automatic bilateral hooks.
The Qubus E system is designed to be easily adaptable to all existing top collection vehicles and available hooking systems, including fully automatic bilateral hooks.
The Qubus E system is designed to be easily adaptable to all existing top collection vehicles and available hooking systems, including fully automatic bilateral hooks.
Single Hook Palpeur
Single Hook Palpeur
The Qubus E system is designed to be easily adaptable to all existing top collection vehicles and available hooking systems, including fully automatic bilateral hooks.
The Qubus E system is designed to be easily adaptable to all existing top collection vehicles and available hooking systems, including fully automatic bilateral hooks.
Double Hook
Double Hook
The Qubus E system is designed to be easily adaptable to all existing top collection vehicles and available hooking systems, including fully automatic bilateral hooks.
The Qubus E system is designed to be easily adaptable to all existing top collection vehicles and available hooking systems, including fully automatic bilateral hooks.
Mushroom (Kinshofer or Bilateral)
Mushroom (Kinshofer or Bilateral)
The Qubus E system is designed to be easily adaptable to all existing top collection vehicles and available hooking systems, including fully automatic bilateral hooks.
The opening for the waste disposal is located on the equipment’s lids, which are made of high-density polyethylene and are watertight, resistant, and easy to use.
The opening for the waste disposal is located on the equipment’s lids, which are made of high-density polyethylene and are watertight, resistant, and easy to use.
The versatility and strength of polyethylene makes it possible to produce waste entry lids in various shapes and colors, which can be used to indicate the types of waste to be deposited. In addition, it is also possible to develop lids with special entry reductions for specific types of waste.
The versatility and strength of polyethylene makes it possible to produce waste entry lids in various shapes and colors, which can be used to indicate the types of waste to be deposited. In addition, it is also possible to develop lids with special entry reductions for specific types of waste.
The versatility and strength of polyethylene makes it possible to produce waste entry lids in various shapes and colors, which can be used to indicate the types of waste to be deposited. In addition, it is also possible to develop lids with special entry reductions for specific types of waste.
General Waste Reduction
General Waste Reduction
The versatility and strength of polyethylene makes it possible to produce waste entry lids in various shapes and colors, which can be used to indicate the types of waste to be deposited. In addition, it is also possible to develop lids with special entry reductions for specific types of waste.
The versatility and strength of polyethylene makes it possible to produce waste entry lids in various shapes and colors, which can be used to indicate the types of waste to be deposited. In addition, it is also possible to develop lids with special entry reductions for specific types of waste.
Rectangular Reduction
Rectangular Reduction
The versatility and strength of polyethylene makes it possible to produce waste entry lids in various shapes and colors, which can be used to indicate the types of waste to be deposited. In addition, it is also possible to develop lids with special entry reductions for specific types of waste.
The versatility and strength of polyethylene makes it possible to produce waste entry lids in various shapes and colors, which can be used to indicate the types of waste to be deposited. In addition, it is also possible to develop lids with special entry reductions for specific types of waste.
Glass Reduction
Glass Reduction
The versatility and strength of polyethylene makes it possible to produce waste entry lids in various shapes and colors, which can be used to indicate the types of waste to be deposited. In addition, it is also possible to develop lids with special entry reductions for specific types of waste.
The QUBUS E semi-underground waste disposal system presents an urban design that can be customized with different exterior finishings. Among other materials, available upon request, we highlight the use of concrete, wood, aluminum and plastic to increase the integration of the equipment in the surrounding environment.
The QUBUS E semi-underground waste disposal system presents an urban design that can be customized with different exterior finishings. Among other materials, available upon request, we highlight the use of concrete, wood, aluminum and plastic to increase the integration of the equipment in the surrounding environment.
Concrete Finishing
The QUBUS E semi-underground waste disposal system presents an urban design that can be customized with different exterior finishings. Among other materials, available upon request, we highlight the use of concrete, wood, aluminum and plastic to increase the integration of the equipment in the surrounding environment.
Concrete Finishing
The QUBUS E semi-underground waste disposal system presents an urban design that can be customized with different exterior finishings. Among other materials, available upon request, we highlight the use of concrete, wood, aluminum and plastic to increase the integration of the equipment in the surrounding environment.
Aluminium Finishing
The QUBUS E semi-underground waste disposal system presents an urban design that can be customized with different exterior finishings. Among other materials, available upon request, we highlight the use of concrete, wood, aluminum and plastic to increase the integration of the equipment in the surrounding environment.
Aluminium Finishing
The QUBUS E semi-underground waste disposal system presents an urban design that can be customized with different exterior finishings. Among other materials, available upon request, we highlight the use of concrete, wood, aluminum and plastic to increase the integration of the equipment in the surrounding environment.
PVC Finishing
The QUBUS E semi-underground waste disposal system presents an urban design that can be customized with different exterior finishings. Among other materials, available upon request, we highlight the use of concrete, wood, aluminum and plastic to increase the integration of the equipment in the surrounding environment.
PVC Finishing
The QUBUS E semi-underground waste disposal system presents an urban design that can be customized with different exterior finishings. Among other materials, available upon request, we highlight the use of concrete, wood, aluminum and plastic to increase the integration of the equipment in the surrounding environment.
The system for intelligent waste management provided by Sotkon is called SOTKIS. This is an integrated management system that provides information about the various processes involved in the disposal and/or collection of waste.
The system for intelligent waste management provided by Sotkon is called SOTKIS. This is an integrated management system that provides information about the various processes involved in the disposal and/or collection of waste.
The system for intelligent waste management provided by Sotkon is called SOTKIS. This is an integrated management system that provides information about the various processes involved in the disposal and/or collection of waste.
SOTKIS PAYT
SOTKIS PAYT
The system for intelligent waste management provided by Sotkon is called SOTKIS. This is an integrated management system that provides information about the various processes involved in the disposal and/or collection of waste.
The system for intelligent waste management provided by Sotkon is called SOTKIS. This is an integrated management system that provides information about the various processes involved in the disposal and/or collection of waste.
SOTKIS Access
SOTKIS Access
The system for intelligent waste management provided by Sotkon is called SOTKIS. This is an integrated management system that provides information about the various processes involved in the disposal and/or collection of waste.
The system for intelligent waste management provided by Sotkon is called SOTKIS. This is an integrated management system that provides information about the various processes involved in the disposal and/or collection of waste.
SOTKIS Level
SOTKIS Level
The system for intelligent waste management provided by Sotkon is called SOTKIS. This is an integrated management system that provides information about the various processes involved in the disposal and/or collection of waste.
| Capacity | A | B | C | D |
|---|---|---|---|---|
| 3M³ | 1170 | 2160 | 1875 | 1875 |
| 5m³ | 2420 | 3410 | 1875 | 1875 |
*Units in mm (aprox. values).
This measures don't apply for construction purposes.
Simple and efficient.
